Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 45

Backplane for 3.5-inch drives
The following illustrations show the slots and connectors on the backplane for 3.5-inch drives.
Figure 13. Front view of the backplane for 3.5-inch drives
Figure 14. Rear view of the backplane for 3.5-inch drives
0 3
- Slot 0-slot 3
Used to connect 3.5-inch drives.
4
10-pin power connector
Used to connect to the backplane power connector on the system board to provide power to the backplane.
5
Optical drive power connector
Used to connect the power cable for the slim optical drive.
6
Mini-SAS ports 0-3
Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the
hard disk drive 0 to hard disk drive 3.
.
Chapter 3 Product overview
31