Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 32

5
3.5-inch-drive bays (0-3)
The EMI integrity and cooling of the server are protected by having all drive bays covered or occupied.
The number of the installed hard disk drives in your server varies by model. The vacant hard-disk-drive
bays are occupied by dummy hard-disk-drive trays.
When you install drives, follow the order of the drive bay numbers.
Front view of server models with 2.5-inch drives
Figure 4. Front view of server models with 2.5-inch drives
1
Front panel
3
Rack handle (right)
5
Slim optical drive (available on some models)
1
Front panel
For detailed information about the controls, connectors, and status LEDs on the front panel, see "Front
panel" on page 19.
2
Pull-out information card
The machine type, model, and serial number label of the server is attached on the pull-out information card.
See "Machine type, model, and serial number label" on page 15.
3
Rack handle (right)
6
Rack handle (left)
If your server is installed in a rack cabinet, you can use the rack handles to slide the server out of the rack
cabinet; or use the rack handles and screws to secure the server in the rack cabinet so that the server
cannot slide out, especially in vibration-prone areas. For more information, refer to the Rack Installation
Instructions that comes with your server.
4
2.5-inch-drive bays (0-7)
The EMI integrity and cooling of the server are protected by having all drive bays covered or occupied.
The number of the installed drives in your server varies by model. The vacant drive bays are occupied
by dummy trays.
When you install drives, follow the order of the drive bay numbers.
5
Slim optical drive
Some server models come with a slim SATA optical drive.
18
ThinkServer RD350G User Guide and Hardware Maintenance Manual
2
Pull-out information card
4
2.5-inch-drive bays (0-7)
6
Rack handle (left)