1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Server
  5. ThinkServer RD350
  6. User manual and hardware maintenance manual

Lenovo ThinkServer RD350 User Manual And Hardware Maintenance Manual

Hide thumbs Also See for ThinkServer RD350:
Table of Contents

Advertisement

Quick Links

Machine Types: 70D6, 70D7, 70D8, and 70D9

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkServer RD350

Summary of Contents for Lenovo ThinkServer RD350

  • Page 1 Machine Types: 70D6, 70D7, 70D8, and 70D9...
  • Page 2 Note: Read Me First Fourth Edition (August 2015) © Copyright Lenovo 2014, 2015.

  • Page 3: Table Of Contents

    Contents Safety information ..Chapter 5. Configuring the server . . 41 Chapter 1. General information ..1 Chapter 2. Server setup road map . . . 5 Chapter 3.
  • Page 4 Appendix A. Notices ..Chapter 7. Troubleshooting and diagnostics ... . . Index....Chapter 8.

  • Page 5: Safety Information

    Safety information Note: 製品をご使用になる前に、製品に付属の Documentation DVD に収録されているマルチリンガルの「安 全に正しくご使用いただくために」を読んで理解してください。 제품을 사용하기 전에 제품과 함께 제공되는 문서 DVD의 다국어 안전 지침을 주의 깊게 읽어보십시오.
  • Page 6 在使用本产品之前，请务必先阅读和了解产品附带的文档 DVD 中的多语言安全说明。 使用本產品之前，請務必閱讀並瞭解產品隨附的文件 DVD 上的多國語言版本安全資訊。 Important: Safety, Warranty, and Support Information...
  • Page 7 Statement 1 DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. Connect all power cords to a properly wired and grounded electrical outlet. Ensure that all power cord connectors are securely and completely plugged into receptacles.
  • Page 8 Statement 3 CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •...
  • Page 9 Statement 6 CAUTION: If you install a strain-relief bracket option over the end of the power cord that is connected to the device, you must connect the other end of the power cord to a power source that is easily accessible in case it needs to be disconnected.
  • Page 10 Statement 11 CAUTION: The following label indicates a potential heat hazard. Statement 12 DANGER Overloading a branch circuit is a potential fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch current ratings at the installation site.
  • Page 11 Statement 16 CAUTION: To reduce the risk of electric shock or energy hazards: • This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest edition of IEC 60950. •...

  • Page 12: Safety Inspection Guide

    Statement 20 CAUTION: A lithium ion battery is provided. To avoid possible explosion, do not burn the battery. Replace the battery only with the Lenovo-approved part. Recycle or discard the battery as instructed by local regulations. Products that are not assessed...
  • Page 13 Grounding requirements...

  • Page 15: Chapter 1. General Information

    Chapter 1. General information Introduction...

  • Page 16: Server Documentation

    Product name Machine type and model (MT-M) Serial number (S/N) Date of purchase Server documentation Printed documents Read Me First Rack Installation Instructions Note:...
  • Page 17 Documentation DVD Note: Safety, Warranty, and Support Information Lenovo License Agreement User Guide and Hardware Maintenance Manual Rack Installation Instructions ThinkServer System Manager User Guide Note: MegaRAID SAS Software User Guide...

  • Page 19: Chapter 2. Server Setup Road Map

    Chapter 2. Server setup road map Rack Installation Instructions...

  • Page 21: Chapter 3. Product Overview

    Chapter 3. Product overview Server package Features Product Specifications Reference Microprocessor Memory...
  • Page 22 Power supply Note: System fans Internal drives Drive bay size Drive bay quantity Drive type Note: Notes:...
  • Page 23 Expansion slots Input/Output (I/O) features Video subsystem Ethernet connectivity Reliability, availability, and serviceability...
  • Page 24 Security features Note: Basic system management features ThinkServer System Manager User Guide...

  • Page 25: Specifications

    Advanced system management features ThinkServer System Manager User Guide Specifications Dimensions Weight Environment Note:...
  • Page 26 Electrical input Software BIOS and TSM update utilities Lenovo Partner Pack for Microsoft System Center Configurations Management Lenovo Partner Pack for Microsoft System Center Operations Management...
  • Page 27 Lenovo Partner Pack for VMware vCenter Lenovo ThinkServer Deployment Manager Boot Manager ➙ Launch TDM Platform Update Application Next Browse...
  • Page 28 Flash Note: Lenovo ThinkServer Diagnostics Lenovo ThinkServer Diagnostics Lenovo ThinkServer Energy Manager Lenovo ThinkServer Operating System-based Platform Update Tool Lenovo ThinkServer Power Planner Lenovo ThinkServer System Manager...
  • Page 29 Lenovo ThinkServer System Manager Premium Locations Machine type, model, and serial number label...
  • Page 30 Note: Figure 1. Label on server models with 3.5-inch-drive bays Figure 2. Label on server models with 2.5-inch-drive bays...
  • Page 31 Front view of the server Note: Front view of server models with 3.5-inch drives Figure 3. Front view of server models with 3.5-inch drives Front panel Slim optical drive Pull-out information card Rack handle (right) Rack handle (left) Rack Installation Instructions 3.5-inch-drive bays (0-3)
  • Page 32 Front view of server models with 2.5-inch drives Figure 4. Front view of server models with 2.5-inch drives Front panel Pull-out information card Rack handle (right) Rack handle (left) Rack Installation Instructions 2.5-inch-drive bays (0-7) Slim optical drive...
  • Page 33 Front panel Figure 5. Front panel Network status LED Network status LED Color Description...
  • Page 34 System health LED Amber Blinking Potential system error (system health LED: amber) Solution Note: Power button with power status LED Status Color Description...

  • Page 35: Rear View Of The Server

    System ID button with ID LED Description Status Color DisplayPort connector USB 2.0 connectors (2) Rear view of the server Figure 6. Rear view of the server...
  • Page 36 Power supply 1 Power supply 2 (available on some models) PCIe slot 2 Physical link width Negotiable link width Supported card length and height PCIe slot 1 Physical link width Negotiable link width Supported card length and height System ID LED Status Color Description...

  • Page 37: Server Components

    Ethernet status LED Color Status Description Serial connector VGA connector (DB-15) Server components Note:...
  • Page 38 Figure 7. Components of server models with 3.5-inch drives...
  • Page 39 Figure 8. Components of server models with 2.5-inch drives Notes:...

  • Page 40: Raid Card

    FRU description Self-service CRU Optional-service CRU RAID card Note:...
  • Page 41 ThinkServer RAID 500 Adapter Figure 9. ThinkServer RAID 500 Adapter Port 0 Port 1 TR 500 key connector...
  • Page 42 ThinkServer RAID 710 Adapter Figure 10. ThinkServer RAID 710 Adapter Port 1 Port 2 ThinkServer RAID Super Capacitor Module connector Hot-swap-drive backplane Drive bay size Drive bay quantity Backplane quantity Drive type...
  • Page 43 Backplane for 3.5-inch drives Figure 11. Front view of the backplane for 3.5-inch drives Figure 12. Rear view of the backplane for 3.5-inch drives Slot 0-slot 3 10-pin power connector Optical drive power connector Mini-SAS ports 0-3...
  • Page 44 Backplane for eight 2.5-inch drives Figure 13. Front view of the backplane for 2.5-inch drives Figure 14. Rear view of the backplane for 2.5-inch drives Slot 0-slot 7 10-pin power connector Mini-SAS ports 4-7 Mini-SAS ports 0-3...

  • Page 45: System Board Components

    System board components Figure 15. System board components SATA connector (optical drive)
  • Page 46 Coin-cell battery SATA connector 1 (ports 4–7) SATA connector 0 (ports 0–3) Front panel connector SD module connector Riser card assembly 1 slot TSM Premium module connector TPM connector PCIe slot Riser card assembly 2 slot RAID upgrade key connector Power supply connector 2 Power supply connector 1...

  • Page 47: System Board Jumpers

    Intrusion switch connector 17 18 Backplane power connector 19 21 23 26 27 29 System fan connector 20 24 25 30 Memory slots Microprocessor 2 socket Microprocessor 1 socket System board jumpers Figure 16. System board jumpers...
  • Page 48 Attention: Jumper cap storage BIOS recovery jumper BIOS default settings jumper Note: Clear password jumper...
  • Page 49 Note:...
  • Page 50 Hot-swap-drive status LEDs Figure 17. Hot-swap-drive status LEDs Drive activity LED Drive status LED Description Unconfigured Bad Note: Unconfigured Bad Unconfigured Good Offline Online ThinkServer MegaRAID SAS Software User Guide...

  • Page 51: Power Supply Status Leds

    Power supply status LEDs Figure 18. Power supply status LEDs Status Description Action Connecting the cables...
  • Page 53 Chapter 4. Turning on and turning off the server Turning on the server Turning off the server CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord.

  • Page 55: Chapter 5. Configuring The Server

    Chapter 5. Configuring the server Using the Setup Utility program Starting the Setup Utility program Viewing information in the Setup Utility program Setup Utility program interface Notes:...
  • Page 56 System Information menu System Information System Information Advanced Settings menu Advanced Settings Advanced Settings Notes: Enabled Disabled Advanced Settings Processor Settings Memory Settings Advanced Power Settings PCI/PCIE Settings SATA Settings USB Settings Serial Settings Wakeup Settings Miscellaneous Settings...
  • Page 57 System Security menu System Security Notes: Enabled Disabled System Security Administrator Password User Password Secure Boot TPM/TCM TSM Settings menu TSM Settings TSM Settings TSM Network Settings User Account Settings Boot Manager menu Boot Manager Boot Sequence Boot Manager Save & Exit menu Save &...

  • Page 58: Setting The System Date And Time

    Save Changes and Reset Discard Changes and Exit Load Optimized Defaults Save as User Defaults Restore User Defaults Pure UEFI OS Optimized Defaults Setting the system date and time System Information System Date System Time Using passwords Setup Utility program password types Administrator password User password Note:...

  • Page 59: Selecting A Startup Device

    Setting, changing, or deleting a password System Security Administrator Password User Password Note: Selecting a startup device Note: Note: Boot Sequence Boot Manager Boot Option #1 Boot Option #5...

  • Page 60: Configuring The Tpm Function

    Configuring the TPM function System Security TPM Settings ➙ TPM Support TPM Support Enabled TPM Security Feature TPM Security Feature Activate TPM Support Disabled TPM Support Enabled System Security TPM Settings TPM Security Feature Activate Setting an Ethernet connector for system management TSM Settings TSM Network Settings ➙...

  • Page 61: Updating Or Recovering The Bios

    Save & Exit Updating or recovering the BIOS Updating (flashing) the BIOS Notes: Recovering from a BIOS update failure Note: Using the automatic recovery feature...

  • Page 62: Configuring Raid

    Using the BIOS recovery jumper Note: Note: Configuring RAID About RAID...
  • Page 63 RAID 0 RAID 1 RAID 5 RAID 6 RAID 10...
  • Page 64 RAID 50 Note: RAID 60 MegaRAID SAS Software User Guide Configuring RAID using the Lenovo ThinkServer Deployment Manager program Configuring the advanced SATA or SAS hardware RAID Note: Boot Manager ➙ Adapters and UEFI Drivers...

  • Page 65: Updating The Firmware

    MegaRAID SAS Software User Guide Updating the firmware...

  • Page 67: Chapter 6. Replacing Hardware

    Chapter 6. Replacing hardware Guidelines Precautions...
  • Page 68 Handling static-sensitive devices Attention: System reliability guidelines...
  • Page 69 Working inside the server with the power on Attention: Removing or extending the server from the rack cabinet Rack Installation Instructions Rack Installation Instructions Removing the server cover Attention: Note:...
  • Page 70 Note: Attention: Figure 19. Removing the server cover Attention: Installing, removing, or replacing hardware Notes:...

  • Page 71: Removing And Reinstalling The Rack Handles

    Attention: Removing and reinstalling the rack handles Attention: Figure 20. Removing the rack handles...

  • Page 72: Removing And Reinstalling The Cooling Shroud

    Figure 21. Installing the rack handles Removing and reinstalling the cooling shroud Removing the cooling shroud Attention: Note:...
  • Page 73 Attention: Figure 22. Removing the cooling shroud Reinstalling the cooling shroud Attention: Note:...

  • Page 74: Installing Or Removing A Memory Module

    Note: Figure 23. Reinstalling the cooling shroud Installing or removing a memory module Note: Memory module installation rules...
  • Page 75 CPU1 DIMMC1 CPU1 DIMMC2 CPU1 DIMMD1 CPU1 DIMMD2 CPU1 DIMMB2 CPU1 DIMMB1 CPU1 DIMMA2 CPU1 DIMMA1 CPU2 DIMMC1 CPU2 DIMMC2 CPU2 DIMMD1 CPU2 DIMMD2 CPU2 DIMMB2 CPU2 DIMMB1 CPU2 DIMMA2 CPU2 DIMMA1 Figure 24. Memory slots on the system board...
  • Page 76 Table 1. Memory module installation rules for servers with one microprocessor CPU1 DIMM Table 2. Memory module installation rules for servers with two microprocessors CPU1 DIMM CPU2 DIMM Memory module installation order in independent mode Notes: Table 3. Memory module installation order in independent mode for servers with one microprocessor CPU1 DIMM Table 4.
  • Page 77 Memory module installation order in mirroring mode Notes: Table 5. Memory module installation order in mirroring mode for servers with one microprocessor CPU1 DIMM Table 6. Memory module installation order in mirroring mode for servers with two microprocessors CPU1 DIMM CPU2 DIMM Memory module installation order in sparing mode Note:...

  • Page 78: Installing A Memory Module

    Table 8. Memory module installation order in sparing mode for servers with two microprocessors CPU1 DIMM CPU2 DIMM Memory module installation order in lockstep mode Notes: Table 9. Memory module installation order in lockstep mode for servers with one microprocessor CPU1 DIMM Table 10.
  • Page 79 Figure 25. Opening the retaining clips of the memory slots Note:...
  • Page 80 Note: Figure 26. Installing a memory module What to do next: Removing a memory module Attention: Note:...
  • Page 81 Figure 27. Removing a memory module What to do next: Installing or removing the ThinkServer System Manager Premium module Installing the TSM Premium module Attention: Notes:...
  • Page 82 Note: Figure 28. Installing the TSM Premium module What to do next: ThinkServer System Manager User Guide Removing the TSM Premium module Attention: Notes:...

  • Page 83: Installing Or Removing The Thinkserver Trusted Platform Module

    Figure 29. Removing the TSM Premium module What to do next: Installing or removing the ThinkServer Trusted Platform Module Installing the TPM Attention: Notes:...
  • Page 84 Note: Figure 30. Installing the TPM What to do next: Removing the TPM Attention:...
  • Page 85 Notes: Note: Figure 31. Removing the TPM What to do next: Installing or removing the RAID 110i upgrade key...
  • Page 86 Installing the RAID 110i key Attention: Note: Note: Figure 32. Installing the RAID 110i key What to do next: Removing the RAID 110i key Attention:...
  • Page 87 Notes: Note: Figure 33. Removing the RAID 110i key What to do next: Installing or removing the Lenovo ThinkServer RAID 500 upgrade key...
  • Page 88 Installing the RAID 500 key Attention: Note: Note: Note: Figure 34. Installing the RAID 500 key What to do next:...
  • Page 89 MegaRAID SAS Software User Guide Removing the RAID 500 key Attention: Attention: Notes: Note: Figure 35. Removing the RAID 500 key What to do next:...

  • Page 90: Installing Or Removing The Sd Module

    MegaRAID SAS Software User Guide Installing or removing the SD module Installing the SD module Attention: Note: Note:...
  • Page 91 Figure 36. Installing the SD module What to do next: Removing the SD module Attention: Note:...
  • Page 92 Note: Figure 37. Removing the SD module What to do next: Installing or removing the ThinkServer RAID Super Capacitor Module Installing the ThinkServer RAID Super Capacitor Module Attention: Notes:...
  • Page 93 Figure 38. Installing the Super Capacitor Module into the holder Note: Figure 39. Installing the ThinkServer RAID Super Capacitor Module What to do next:...
  • Page 94 Removing the ThinkServer RAID Super Capacitor Module Attention: Note: Figure 40. Removing the ThinkServer RAID Super Capacitor Module...
  • Page 95 Figure 41. Removing the Super Capacitor Module from the holder What to do next: Installing or removing a PCIe card Note: Installing a PCIe card Attention:...
  • Page 96 Figure 42. Opening the PCIe card latch Figure 43. Removing a PCIe slot bracket Note:...

  • Page 97: Removing A Pcie Card

    Figure 44. Installing a PCIe card Figure 45. Pivoting the card latch to the closed position What to do next: Removing a PCIe card Attention:...
  • Page 98 Figure 46. Pivoting the card latch to the open position Note: Figure 47. Removing the PCIe card What to do next:...

  • Page 99: Installing Or Removing The Optical Module

    Installing or removing the optical module Note: Installing the optical module Attention: Notes: Figure 48. Installing the optical module...
  • Page 100 Figure 49. Pivoting the optical module handle to the closed position What to do next: Removing the optical module Attention: Note:...
  • Page 101 Figure 50. Pivoting the optical module handle Figure 51. Removing the optical module What to do next:...

  • Page 102: Installing Or Removing The Intrusion Switch

    Installing or removing the intrusion switch Installing the intrusion switch Attention: Note: Figure 52. Installing the intrusion switch What to do next:...
  • Page 103 Removing the intrusion switch Attention: Notes: Figure 53. Removing the intrusion switch What to do next:...

  • Page 104: Installing Or Replacing A Heat Sink

    Installing or replacing a heat sink Attention: CAUTION: The heat sink might be very hot. Turn off the server and wait several minutes to let the server cool before removing the server cover. Note:...
  • Page 105 Note: Figure 54. Removing the heat sink Notes:...

  • Page 106: Installing Or Replacing The Microprocessor

    Figure 55. Installing the screws to secure the heat sink What to do next: Installing or replacing the microprocessor Installing the second microprocessor Attention:...
  • Page 107 CAUTION: The heat sinks and microprocessors might be very hot. Turn off the server and wait several minutes to let the server cool before removing the server cover. Notes: Note: Figure 56. Opening the handles...
  • Page 108 Note: Figure 57. Opening the microprocessor retainer Figure 58. Do not touch the pins...
  • Page 109 Note: Figure 59. Installing the microprocessor Note: Figure 60. Removing the microprocessor socket cover...

  • Page 110: Replacing The Microprocessor

    Note: Figure 61. Securing the microprocessor in the socket What to do next: Replacing the microprocessor Attention: CAUTION: The heat sink and microprocessor might be very hot. Turn off the server and wait several minutes to let the server cool before removing the server cover.
  • Page 111 Notes: Note: Figure 62. Opening the handles...
  • Page 112 Figure 63. Opening the microprocessor retainer Notes: Figure 64. Removing the microprocessor...
  • Page 113 Figure 65. Do not touch the pins Note: Figure 66. Installing the microprocessor...
  • Page 114 Note: Figure 67. Securing the microprocessor in the socket Notes: Figure 68. Applying the thermal grease to the top of the microprocessor What to do next:...
  • Page 115 Installing or replacing a hot-swap redundant power supply CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 116 Figure 69. Removing the protective shield for the power supply bay...
  • Page 117 Figure 70. Installing a hot-swap redundant power supply Replacing a hot-swap redundant power supply Attention: Note:...
  • Page 118 Note: Figure 71. Removing a hot-swap redundant power supply Installing or replacing a hot-swap hard disk drive Attention: Attention:...
  • Page 119 Notes: Figure 72. Opening the handle of a hard disk drive Figure 73. Opening the handle of a dummy hard-disk-drive tray...
  • Page 120 Figure 74. Removing the hot-swap hard disk drive or the dummy tray Note: Figure 75. Installing the hot-swap hard disk drive...
  • Page 121 What to do next: Installing or replacing a 2.5-inch drive Attention: Notes: Installing a 2.5-inch drive into a 3.5-inch hard-disk-drive bay Attention:...
  • Page 122 Note: Figure 76. Opening the handle of the dummy hard-disk-drive tray Figure 77. Removing the dummy hard-disk-drive tray Note:...
  • Page 123 Figure 78. Positioning the 2.5-inch drive into the drive adapter Figure 79. Installing the screws to secure the 2.5-inch drive to the drive adapter...
  • Page 124 Figure 80. Installing the screws to secure the drive adapter and the 2.5-inch drive to the bracket Figure 81. Installing the bracket with the 2.5-inch drive What to do next:...
  • Page 125 Replacing a 2.5-inch drive from a 3.5-inch hard-disk-drive bay Attention: Figure 82. Opening the handle of the 3.5-inch drive bracket Figure 83. Removing the bracket with the 2.5-inch drive...
  • Page 126 Figure 84. Removing the screws that secure the 2.5-inch drive and the drive adapter Figure 85. Removing the screws that secure the 2.5-inch drive...

  • Page 127: Installing Or Replacing The Optical Drive

    Figure 86. Removing the 2.5-inch drive from the drive adapter What to do next: Installing or replacing the optical drive Attention: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: •...
  • Page 128 Notes: Figure 87. Removing the optical drive...
  • Page 129 Figure 88. Installing the optical drive Figure 89. Connecting the connector to the rear of the optical drive What to do next:...
  • Page 130 Connecting an external tape drive Attention: Notes: Figure 90. Connecting the external tape drive Replacing the hot-swap hard-disk-drive backplane Attention: Notes:...
  • Page 131 Figure 91. Removing the hot-swap hard-disk-drive backplane Note:...

  • Page 132: Replacing A System Fan

    Figure 92. Installing the hot-swap hard-disk-drive backplane What to do next: Replacing a system fan Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 133 Note: Figure 93. Removing the system fan Figure 94. Installing the system fan...
  • Page 134 What to do next: Replacing the front panel board Attention: Notes:...
  • Page 135 Figure 95. Removing the front panel board Note:...
  • Page 136 Figure 96. Installing the front panel board What to do next: Replacing the riser card assembly Attention: Note:...
  • Page 137 Figure 97. Removing the riser card assembly Figure 98. Removing the riser card...
  • Page 138 Figure 99. Installing the riser card Figure 100. Installing the riser card assembly What to do next: Replacing the coin-cell battery Attention:...
  • Page 139 DANGER Danger of explosion if battery is incorrectly replaced. When replacing the lithium coin cell battery, use only the same or an equivalent type that is recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
  • Page 140 Figure 101. Removing the coin-cell battery Figure 102. Installing the coin-cell battery What to do next: Note: For service technician only: replacing the system board Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 141 CAUTION: The heat sinks and microprocessors might be very hot. Turn off the server and wait several minutes to let the server cool before removing the server cover. Note:...
  • Page 142 Note: Figure 103. Removing the system board...
  • Page 143 Figure 104. Installing the system board Note: Notes: Figure 105. Applying the thermal grease to the top of the microprocessor...
  • Page 144 Note: Figure 106. Securing the microprocessor retainer Figure 107. Installing the microprocessor socket cover...
  • Page 145 What to do next: Completing the parts replacement Reinstalling the server cover and reconnecting cables Attention: Attention: Note:...

  • Page 146: Updating The Server Configuration

    Figure 108. Installing the server cover Rack Installation Instructions Attention: Note: Updating the server configuration...

  • Page 149: Chapter 7. Troubleshooting And Diagnostics

    Chapter 7. Troubleshooting and diagnostics Troubleshooting procedure Viewing the status and diagnostic LEDs...
  • Page 150 Viewing the system event log ThinkServer System Manager User Guide Basic troubleshooting tables Lenovo ThinkServer Deployment Manager program problems Note: Action Symptom Optical drive problems Notes:...
  • Page 151 Symptom Action Storage drive problems Notes:...

  • Page 152: Memory Module Problems

    Action Symptom Memory module problems Notes:...
  • Page 153 Symptom Action Keyboard, mouse, and USB device problems Symptom Action...
  • Page 154 Symptom Action...

  • Page 155: Chapter 8. Getting Information, Help, And Service

    Chapter 8. Getting information, help, and service Information resources Using the documentation ThinkServer Web site Lenovo Support Web site...

  • Page 156: Help And Service

    Help and service Before you call Calling for service Problem determination Hardware repair Engineering Change management...
  • Page 157 Safety, Warranty, and Support Information Using other services Warranty Purchasing additional services...

  • Page 159: Appendix A. Notices

    Appendix A. Notices Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing...
  • Page 160 Trademarks Important notes Polyvinyl Chloride (PVC) cable and cord notice WARNING: Wash hands after handling Recycling information...

  • Page 161: Battery Return Program

    Battery return program Battery recycling information for the United States and Canada Battery recycling information for the European Union Notice: Requirement for batteries containing perchlorate...

  • Page 162: Recycling Information For Brazil

    Recycling information for Brazil Declarações de Reciclagem no Brasil Descarte de um Produto Lenovo Fora de Uso Particulate contamination Attention: Table 11. Limits for particulates and gases Contaminant Limits Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle...

  • Page 163: Important Weee Information

    Table 11. Limits for particulates and gases (continued) Contaminant Limits Environmental conditions for process measurement and control systems: Airborne contaminants Important WEEE information Restriction of Hazardous Substances Directive (RoHS)
  • Page 164 China RoHS Turkish RoHS...
  • Page 165 India RoHS European Union RoHS Ukraine RoHS German Ordinance for Work gloss statement Export classification notice Electronic emission notices Federal Communications Commission (FCC) Statement...
  • Page 166 Industry Canada Compliance Statement United Kingdom telecommunications safety requirement European Union - Compliance to the Electromagnetic Compatibility Directive Warning: German Class A compliance statement Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse A EU-Richtlinie zur Elektromagnetischen Verträglichkeit...
  • Page 167 Verträglichkeit von Geräten), bzw. der EMV EG Richtlinie 2004/108/EC (früher 89/336/EWG), für Geräte der Klasse A. Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse A. Korea Class A compliance statement Taiwan Class A compliance statement Lenovo product service information for Taiwan...
  • Page 168 Eurasian compliance mark Japan VCCI Class A compliance statement ENERGY STAR model information...

  • Page 171: Index

    Index...

Table of Contents