Removing And Reinstalling The Cooling Shroud - Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual

2. To reinstall the rack handles, align the five screw holes in the rack handle with the corresponding holes
in the chassis. Install the five screws to secure the rack handle on each side of the server.
Figure 23. Installing the rack handles

Removing and reinstalling the cooling shroud

To access some server components on the system board, remove the cooling shroud. To ensure proper
cooling and airflow, reinstall the cooling shroud before turning on the server.
Removing the cooling shroud
your
page and
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
To remove the cooling shroud, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 57.
3. Remove the server cover. See "Removing the server cover" on page 57.
60
ThinkServer RD350G User Guide and Hardware Maintenance Manual
page
eading and