Ricoh SP 230DNw Service Manual page 28

Error
Description
Codes
5406 ---
5502 ---
5602 ---
5702 ---
5801 ---
5802 ---
5902 ---
5A02 ---
5B02 ---
5C02 ---
5D02 ---
5E00 ---
The front cover sensor detected that
6001
the front cover was open.
6002 ---
6003 ---
The eject sensor detected that the
6004
fuser cover was open.
6007 ---
The new toner sensor detected that no
6101
toner cartridge was set.
6102 ---
6103 ---
6104 ---
6106 ---
Detected that the drum unit was not set
6200
by detecting the grid terminal current.
6201 ---
6202 ---
6203 ---
6204 ---
6208 ---
6209 ---
620A ---
Refer Error
to: Codes
6300 ---
6400 ---
6602 ---
6701 ---
The side thermistor detected a
6801 temperature higher than the specified
value.
6802 ---
Some fuser unit errors occurred at
6901 power-ON or upon recovery from sleep
mode.
After the error was detected at the
fuser unit, power was turned ON again
and the error is being checked. (If
6902
power is turned OFF and ON after
error code 6901 occurred, this code is
displayed for about 15 minutes.)
Electric discharge that may be caused
6A00 by dirt on the corona wire of the drum
unit was detected.
6B01 ---
6B02 ---
6B03 ---
2-30 6B04 ---
6B0A ---
6C01 ---
2-30 6C02 ---
6C03 ---
2-30 6C04 ---
6D00 ---
6E00 ---
Detected that supply power is
6F00
unstable. (less than 100 times)
After the registration rear sensor
7000 detects paper pass, the eject sensor
does not detect paper pass.
2-31 7001 ---
7002 ---
7003 ---
7004 ---
After the registration rear sensor
detects the end of paper pass and the
7100 specified period of time has passed,
the eject sensor continues to detect
paper pass.
7101 ---
7102 ---
7103 ---
2-14
Description
Confidential
Refer
to:
2-32
2-32
2-32
2-33
2-33
2-33
2-34