Display Lan Connection Status (Function Code 33) - Ricoh SP 230DNw Service Manual


Location of sensors
Eject sensor PCB ASSY
Back cover/duplex
tray sensor
Front cover sensor
Registration clutch

1.3.8 Display LAN connection status (Function code 33)

<Function>
This function is used to check the connection status of the wired LAN.
<Operating Procedure>
(1) Press the [▲] or [▼] in the initial state of maintenance mode to display "MAINTENANCE
33" on the LCD, and press the [OK].
(2) One of the following items is displayed on the LCD depending on the wired LAN
connection of the machine.
(3) Press and hold the [Go] for five seconds, and the machine returns to the initial state of
maintenance mode.
LCD
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
T1 clutch
Fig. 5-4
LAN connection status
100B-FD
100B-HD
10B-FD
10B-HD
Not connected
5-12
New toner sensor PCB ASSY
Registration rear sensor
Paper feed sensor PCB ASSY
Registration
front sensor
Confidential