Installing The Detector Unit - Siemens FDL241-9 Mounting, Commissioning

4.2 Installing the detector unit

A6V10332811_e_en_--
WARNING
Danger of falling
Bodily injury
● When installing, use a secured ladder or work platform.
w
The carrier for connection terminals is mounted in the detector base.
1. Insert the detector unit (1) into the base (2) along with the carrier for the
connection terminals with the LED pointing downwards.
2. Fasten the detector unit with four screws (3). Ensure that the screws are
tightened.
2
Figure 18: Installing the detector unit
1 Detector unit
2 Detector base with carrier for
connection terminals
Commissioning
Installing the detector unit
1
3
3 Screws
4
23 | 44