Power Supply Installation - Fermax VIDEO DIGITAL COLOR KIT Manual

3.The Power Supply can be unmounted
from the DIN rail by levering at the flange
with a flat screw-driver.
NOTE:
The Power Supply must be installed in a place dry and safe from
inclemency of weather. It is advisable to install it protected through a
thermo-magnetic circuit breaker at the main input.
OUTDOOR PANEL SET UP
The Outdoor Panel must be set up depending on the type of installation,
using the jumpers in the rear side of the amplifier.
VIDEO DIGITAL COLOR KIT manual
4.Plug-in the wires in the corresponding
terminals following the installation
diagrams attached.
* The jumper JP1 must be always
JP1
connected, except when having 2
Outdoor Panels, in which case the
jumper in one of them will be removed
JP2
ING
(secondary).
FRA
ESP
* Select the language of the door open
ALE
message by means of JP2: english
(ING), french (FRA), spanish (ESP) and
german (ALE).
Pag 31