Replacing The Water Outlet Pipe With Uvc Lamp; Renew Water Bath - EauVation Acqua 80 Service Instructions Manual

10 Replacing the water outlet pipe with UVC lamp

For installation and removal see chapter 9.
11 Renewing the water bath
Replacing the water outlet pipe with UVC lamp
 Close the water stop cock.
 Depressurise the water pipe by pressing the button for still water.
 Turn off the water dispenser.
 Pull out the mains plug.
 Hold the level indicator hose (1) in a bucket.
 Completely empty the water bath.
 Position the level indicator hose (1) upright and use a cable tie to
fix in place.
 Insert the water connection hose into the "FILL THE ICE-BANK"
connection.
 Open the water stop cock.
 Fill the water bath to a level between MIN and MAX.
 Close the water stop cock.
 Insert the water connection hose into the "IN H
Before inserting the hoses, spray the end of the hose with
EAUVATION N° 2.
 Unscrew the upper cover plate and remove it.
 Using curved needle-nose pliers, add one tablet to prevent the
formation of algae to the water bath.
 Screw the upper panel tight.
 Plug in the mains plug.
O" connection.
2
19