Let the maintenance cleaner act
Turn on the water dispenser.
Open the water stop cock.
Draw still water until a pressure shock occurs.
Dispose of water.
Draw approx. 100 ml of still water. When drawing the water, hold a chlorine test strip into the water. As
soon as the colour changes from white to purple, the maintenance cleaning agent has come through.
Dispose of water.
Draw carbonated water. When drawing the water, hold a chlorine test strip into the water. As soon as the
colour changes from white to purple, the maintenance cleaning agent has come through.
Dispose of water.
Let the cleaning agent act for approx. 5 minutes. Draw approx. 50 ml of each water type in between.
Rinse the maintenance cleaning agent
Draw approx. 10 l of each water type and dispose of it. When drawing, alternate between the two water
types.
Draw approx. 200 ml of each water type.
Using the chlorine test strip, check whether the water still contains maintenance cleaner (colour changes
white -> purple).
Dispose of water.
Keep drawing water from both water types until the colour no longer changes.
Close the water stop cock.
Depressurise the water pipe by pressing the button for still water.
Turn off the water dispenser.
Pull the mains plug.
Removing the maintenance cartridge
before
after
Removing the maintenance cartridge (3+4).
Spray the hose end (1) with EAUVATION N° 2. Also spray the hose connection at the pressure reducer (2).
Plug the hose (1) into the pressure reducer (2).
IMPORTANT
Check the end of the hose. If there are any scores on the hose, shorten the hose or re-
place it to ensure a tight plug connection.
Hygiene maintenance
13