Using The Appliance; Preparing The Appliance For Use; Blender - Philips HR1787/00 User Manual

Reduce risk of injury to persons, never place mixing blades on
base without blender jar properly attached.
The blender jar is made of glass and therefore breakable. Do not
drop the glass jar on a floor or hard surface.Avoid extreme
temperatures. If the glass jar is very cold, rinse it well with
lukewarm water before pouring in hot liquid. If the glass jar cracks,
discontinue use.
Always make sure that the rubber sealing ring is in the correct
position before you use the blender in order to avoid leakage.
The motor only starts if the blender jar or the mill has been
assembled properly onto the motor unit.
Make sure the blade unit is securely fixed onto the mill beaker
before you screw the mill onto the motor unit.
Never touch the blade unit when it is assembled on the appliance
when the appliance is plugged in.
Avoid touching the cutting edges of the blade units when cleaning
them.They are very sharp, you could easily cut your fingers on
them.
When removing the goblet from the motor unit, take care not to
unscrew the glass jar from the blade unit as this will cause the
ingredients to leak from the goblet.

Preparing the appliance for use

Wash all accessories and detachable parts (see 'Cleaning').
C
Push excess mains cord back into the cord storage compartment
on the right side of the appliance.

Using the appliance

Blender

The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
C
1 Place the rubber sealing ring on the inner edge of the blade
unit.
ENGLISH
5