Program Manager - Delta Electronics HMC Series Manual

The take-out arm needs different motions to handle different types of production line.
The combination of different motions is called [Program]. This system provides 1000
programs for users. Each program contains 400 motion commands.
Another 10 program templates are provided for administrators to pre-edit the commonly
used motions and stores these motions in different program templates. When loading
the program template, users can quickly download each created motion that they had
defined beforehand.
In addition, to import and export the program via USB disk or SD card is also supported
so that the program can be shared among different take-out arm systems.

3.1 Program Manager

Click on the program name on status bar to enter the screen of [Program manager].
See the following figure for the screen of [Program manager]:
(1) Currently used program: Display the program number and program name that
currently used.
(2) Program list: Display all program names and the modified time. Directly click on it
to select the program.
(3) Select the program: Select the program number that you wish to operate.
54
HMC Take-out Robot for Injection Molding Machine
June, 2015