Signal Monitoring; Auxiliary Key; Auxiliary Key - Delta Electronics HMC Series Manual

HMC Take-out Robot for Injection Molding Machine
(18) Record for the cycle time: Records for the last ten cycle time and product
take-out time.

2.9 Signal Monitoring

It can monitor the signal of take-out arm and injection molding machine. Click on
[Terminal] on main screen to go to terminal monitoring screen, you can monitor and
control signals of cylinder and take-out arm, input/output signals of injection molding
machine and signals of servo drive.
Click on the button of [On/Off] to enable or disable the function of the corresponding
terminal.
Note:
Function of each terminal can be flexibly defined. Screen that shows above is for reference only.
2.10

Auxiliary Key

51
June, 2015