Ethernet Ports - Supermicro FatTwin F619P2-RT User Manual

FatTwin F619P2-RT/RTN/RC0/RC1 User's Manual
VGA Port
The onboard VGA port is located next to IPMI LAN port on the I/O back panel. Use this
connection for VGA display.
UID LED Indicator
A UID LED Indicator (LE1) is located on the I/O back panel. The UID Indicator provides easy
identification of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information on IPMI,
please refer to the IPMI User's Guide posted on our website at http://www.supermicro.com.
Universal Serial Bus (USB) Ports
There are two USB 3.0 ports (USB0/1) on the I/O back panel.

Ethernet Ports

Two LAN ports (LAN1/LAN2) and a dedicated IPMI LAN are located on the I/O back panel.
These LAN ports are supported by the onboard AST 2500 BMC and accepts an RJ45 type
cable. Refer to the LED Indicator Section for LAN LED information.
UID LED
Pin Definitions
Color Status
Blue: On Unit Identified
Back Panel USB0/1 (3.0)
Pin Definitions
Pin# Definition Pin#
1 VBUS 10
2 D- 11
3 D+ 12
4 Ground 13
5 StdA_SSRX- 14
6 StdA_SSRX+ 15
7 GND_DRAIN 16
8 StdA_SSTX- 17
9 StdA_SSTX+ 18
62
Definition
Power
USB 2.0 Differential Pair
Ground of PWR Return
SuperSpeed Receiver
Differential Pair
Ground for Signal Return
SuperSpeed Transmitter
Differential Pair