Assembly Instructions For Applications Other Than Pet Nail Grooming; Cleaning The Pet Grooming Attachment; Collets - Dremel PawControl 7760-PGK Operating/Safety Instructions Manual

1600A01P55.qxp_7760-PGK 4/15/19 9:56 AM Page 19
Nail Grooming Operating Instructions
most pet supply stores. Follow the
directions on the packaging for proper
use instructions.
▶ Cleaning the Pet Grooming
Attachment
Remove the pet grooming attachment
from the rotary tool as needed to clean
Assembly Instructions for applications
PawControl 7760-PGK can also be used
with a variety of Dremel accessories that
will turn this tool into a carver, a
grinder, polisher, sander, cutter, power
brush, drill and more.
First, reverse the assembly steps on
pages 15 and 16 to remove pet
grooming attachment, EZ Lock™
mandrel and reinstall the nose cap.

▶ Collets

Dremel accessories such as engraver
bits, grinding stones and mandrels are
mounted on the tool using collet and
collet nut system.
PawControl 7760-PGK comes with the
1/8" collet No 480. There are also three
other collets to accomodate smaller
diameter accessories. Identification (ID)
rings will help you choose the right
collet for your bits (Fig. 12).
other than pet nail grooming
Always be sure the tool is turned "OFF" before changing accessories,
changing collets or servicing your cordless rotary tool.
out any nail dust or debris. Wash only
the attachment with warm water and
dry thoroughly with a clean cloth before
reinstalling on rotary tool.
Fig. 12
4
1 2a 2b
1 Collet nut
2a 1/8" collet 480 - no ID rings
2b 3/32" Collet 481 - three ID rings
2c 1/16" Collet 482 - two ID rings
2d 1/32" Collet 483 - one ID ring
2e ID ring
19
2c 2d 2e