Removing The Sf Cooling Module For The Vsp 9012 - Avaya 9012FC IO Manual

Cooling module installation and removal for the VSP 9012
3. Tighten the captive screws on the bottom of the cooling module to fasten the cooling module
to the chassis.
4. Verify that the cooling module LED light is green.

Removing the SF cooling module for the VSP 9012

Before you begin
Acquire the following items:
• Phillips #2 screwdriver
• Antistatic wrist strap
Electrostatic alert:
ESD can damage electronic circuits. Do not touch electronic hardware unless you wear a
grounding wrist strap or other static-dissipating device.
About this task
Remove the SF cooling module from the slot to remove it. You can hot swap the cooling modules.
Procedure
1. Loosen the captive screws that secure the cooling module to the midplane.
Danger:
Risk of personal injury
Installing Cooling Modules in Avaya VSP 9000
56
Comments? infodev@avaya.com
March 2015