Installing The Cooling Module For The Vsp 9010 - Avaya 9012FC IO Manual

Installing the cooling module for the VSP 9010

The cooling module for the Virtual Services Platform 9010 provides cooling from front-to-back. You
must install two 9010CM cooling modules in the chassis. You can hot swap the cooling modules.
Install the cooling modules horizontally in the front of the Virtual Services Platform 9010.
Before you begin
• Remove the air inlet bezel.
• Acquire the following items:
- Phillips #2 screwdriver
- Antistatic wrist strap
March 2015
Installing the cooling module for the VSP 9010
Installing Cooling Modules in Avaya VSP 9000
Comments? infodev@avaya.com
47