Removing A Power Supply - Extreme Networks ExtremeCloud E2120 Installation Manual

1 Remove the insert from the chassis power supply bay.
Figure 5: Power supply insert chassis
2 Insert the power supply module into the power supply bay.
Figure 6: Installing a Power Supply
3 Push the power supply module into the bay until it locks into place.

Removing a Power Supply

If you are removing a power supply:
1 Detach the power supply cord from the power supply that needs to be removed.
2 Pull the power supply module using the handle, while pushing the latching tab outward to
disengage the power supply from the unit.
ExtremeCloud™ Appliance E2120
Hardware Installation
9