Troubleshooting; Technical Specifications - Network Technologies XTENDEX Series Installation And Operation Manual

NTI 4K HDMI EXTENDER OVER HDBASE-T

TROUBLESHOOTING

Display has a black screen
Screen is distorted or displays noise

TECHNICAL SPECIFICATIONS

Transmitter
Compatibility
Connectors
Receiver
Connectors
Resolutions supported
Audio Support
General
Dimensions (WxDxH) (In.)
Power (Local and Remote)
Operating temperature
Storage temperature
Operating/storage relative
humidity
Maximum distance
Cable type
Regulatory Approvals
Note: When routing the CATx cable, be careful not to loop the wire. Loops in the cable tend to cause signal
degradation.
 Make sure power is connected (blue LED is ON)
 Make sure all cables are firmly connected at the transmitter, receiver, and the
devices
 Make sure video source and display are powered ON and fully booted
 Power cycle the Transmitter and Receiver after cable connections have been
checked
 Check to make sure resolution is within the specified limitations
 Power cycle the entire system
 Power down, disconnect and reconnect all cables, and power back ON.
USB computer (PC, SUN and MAC) with Ultra-HD HDMI output
Windows 2000/XP/Vista/7/8/10, Windows Server 2000/2003/2008/2012, Solaris, Linux, FreeBSD,
and MAC OS 9/10.
 One female HDMI connector.
 One female USB Type B Mini connector.
 3-pin screw terminal for RS232.
 One female RJ45 port for sending/receiving UHD video, audio, USB, RS232 and DDC signals.
 One female HDMI connector for display.
 One female USB Type Mini B connector for connecting USB keyboard, mouse, flash drive,
HDD, or touchscreen display.
o Use a USB hub to extend multiple USB devices.
 3-pin screw terminal for RS232.
o Support full-duplex RS232 up to 115200 baud.
 Ultra-HD 4Kx2K resolutions:
o 3840x2160 at 60Hz, 4:2:0
o 3840x2160 at 30Hz, 4:4:4
 2K Cinema (2048x1080 at 60Hz)
 HDTV resolutions to 1080p
 Up to 1920x1200 (WUXGA)
Supports embedded digital audio through HDMI compatible TVs or audio receivers.
1.73x2.87x0.98 (44x73x25mm)
100 to 240 VAC at 50 or 60 Hz; 5VDC,2A via AC adapter. (2x US AC adapter included.)
32 to 122°F (0 to 50°C).
-4 to 167°F (-20 to 75°C).
5 to 95% non-condensing RH
328 feet (100 meters)
CAT6/6a/7 cable
CE, FCC, RoHS, TAA compliant
7