Cleaning And Care; Cleaning The Housing And The Attachments; Cleaning The Protection Grid And The Air Inlet; Storage - Silvercrest SHTD 2200 E1 Operation And Safety Notes

Cooling mode
Use the cooling mode to make the hairstyle last
longer:
9
Press and hold
button
Release button
NOTES:
The cooling function (
the heat level is set to "no heat" (
When the product fails to function, disconnect the
product from power . Let the product to cool .
˜ Cleaning and care
m
DANGER! Risk of electric shock! Always
switch off the product and disconnect the power
plug 6 from the electrical outlet before cleaning
the product .
m
WARNING! Do not immerse the product's
electrical components in water or other liquids .
Never hold the product under running water .
m
CAUTION! Do not use corrosive or abrasive
cleaning agents or material to clean the product .
˜ Cleaning the housing and the
attachments
Remove the concentrator nozzle 11 or the diffuser
12 from the air outlet 10 .
Wipe the housing, concentrator nozzle 11 and
diffuser 12 with a dry cloth .
˜ Cleaning the protection grid and
the air inlet
Hold the handle of the product . Rotate the
protection grid 3 in a counterclockwise direction .
Remove the protection grid 3 from the
air inlet 2 (Fig . D) .
Cool air flow
Cool air flow on
Cool air flow stops
9 ) does not work when
8 ) .
Clean the protection grid 3 and the air inlet 2
with a soft brush .
Attach the protection grid 3 back onto the
air inlet 2 .
Rotate the protection grid 3 in a clockwise
direction to securely attach it onto the air inlet 2 .
˜ Storage
Store the product at a dry location out of the
reach of children .
Store the product in the original packaging when
it is not in use .
Alternatively, the product can also be hung on its
hanging loop 5 .
Roll up the power cord 6 evenly and without
kinks .
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local recycling
facilities .
Observe the marking of the packaging
materials for waste separation, which are
marked with abbreviations (a) and numbers
(b) with following meaning: 1–7: plastics /
20–22: paper and fibreboard / 80–98:
composite materials .
The product and packaging materials are
recyclable, dispose of it separately for better
waste treatment .
The Triman logo is valid in France only .
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product .
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste . Information on
collection points and their opening hours
can be obtained from your local authority .
GB 11