Cleaning; Cleaning The Housing; Cleaning The Air Suction Grill - Silvercrest SHTD 2200 B2 Operating Instructions Manual

■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form.
■ You can use the cooling level button

Cleaning

RISK OF ELECTRIC SHOCK
► Always remove the mains plug from the socket before you clean the appliance.
► Under no circumstances may you immerse the appliance in water or other
liquids when cleaning it!
► After being cleaned, the hair dryer must be completely dry before using it
again.
WARNING - RISK OF PHYSICAL INJURY!
► Allow the appliance to cool sufficiently before cleaning it.
CAUTION - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.

Cleaning the housing

■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.

Cleaning the air suction grill

WARNING - RISK OF FIRE!
► Clean the air intake grill
1) Turn the air intake grill
from the hair dryer.
2) Clean the openings of the air intake grill
3) Push the air intake grille
air intake grille
Turn the air intake grille
and sits tightly.
■ 8 │ GB │ IE
at regular intervals with a soft brush.
a little way anticlockwise so that it can be removed
back onto the hairdryer so that the tabs on the
click back onto the recesses on the hairdryer housing.
clockwise a little way so that it clicks into place
to cool down your hair down.
with a soft brush.
SHTD 2200 B2