Handling Compact Discs - Sanyo CDP-455 Instruction Manual

I
HANDLING COMPACT DISCS
I
This unit is designed to play compact discs
bearing the identification logo below. Discs
that do not carry this logo may not con-
form to the CD standard and may not play
DIGITAL AUDIO
Dirty, scratched or warped discs may
cause skipping or noise. Pay attention
to the following:
" Handle the disc only by the edges. To
keep the disc clean, do not touch the
surface of the disc.
" Discs should be returned to their cases
after use to avoid serious scratches
that could cause the laser pickup to
skip.
Do not expose discs to direct sunlight,
high humidity, or high temperatures for
extended periods. Prolonged exposure
to high temperatures can warp the disc.
" Do not ap~ly paper or write anything
on either side of the compact disc.
Sharp writing instruments, or the inks
used in some felt-tip pens, may
damage the surfaces of the disc.
Fingerprints should be carefully wiped
from the swface of the disc with a soft
cloth. Unlike conventional records,
compact discs have no grooves to
collect dust and microscopic debris,
so gently wiping them with a soft cloth
should remove most particles. Wipe
in a straight motion from the inside
to the outside of the disc. Small dust
particles and light stains will have no
effect on reproduction quality.
Never use such chemicals as record
sprays, anti-static sprays, benzene or
thinner to clean compact discs. Such
chemicals can damage the plastic sur-
face of the disc.
The unit will not play a disc that has been insetied upside down, or discs which
do not conform to the Compact Disc standard. Also, the unit may not play discs
that are scratched, soi!ed or carry fingerprints.
" 8 cm CDs can be played without an adaptor.
-14-