Handling Compact Disc - Sanyo CDP-195 Instruction Manual

I
HANDLING COMPACT DISCS
This unit is designed to play compact discs
bearing the identification logo below. Discs
that do not carry this logo may not conform
to the CD standard and may not play prop-
'r'y"~~yi
DIGITAL AUDIO
Dirty, scratched or warped discs may
cause skipping or noise. Pay attention to
the following:
.
Handle the disc only by the edges. To
keep the disc clean, do not touch the
surface of the disc,
.
Discs should be returned to their cases
after use to avoid serious scratches
that could cause the laser pickup to
skip.
Do not expose discs to direct sunlight,
high humidity, or high temperatures-for
extended periods. Prolonged exposure
to high temperatures can warp the disc.
Do not apply paper or write anything on
either side of the compact disc, Sharp
writing instruments, or the inks used in
some felt-tip pens, may damage the
surfaces of the disc.
Fingerprints should be carefully wiped
from the surface of the disc with a soft
cloth, Unlike conventional records,
compact discs have no grooves to col-
lect dust and microscopic debris, so
gently wiping them with a soft cloth
should remove most particles. Wipe in
a straight motion from the inside to the
outside of the disc, Small dust particles
and light stains will have no effect on
reproduction quality,
YES =
Never use such chemicals as record
sprays, anti-static sprays, benzene or
thinner to clean compact discs. Such
chemicals can damage the plastic sur-
face of the disc
The unit will not play a disc that has been inserted upside down, or discs which do
not conform to the Compact Disc standard. Also, the unit may not play discs that are
scratched, soiled or carry fingerprints.
8 cm (3") CDs can be played without an adaptor,
-E12-