Handling Compact Discs - Sanyo CDP-150 Instruction Manual

Hide thumbs Also See for CDP-150:
Table of Contents

Advertisement

.
m
I
HANDLING COMPACT
DISCS
I
This unit is designed
to play compact
discs
bearing the identification
logo below. Discs that
do not carry this logo may not conform to the CD
standard
and may not play properly.
,.,
diii!
DIGITAL AUDIO
Dirty, scratched
or warped discs may cause
skipping
or noise. Pay attention
to the fol-
lowing:
s
Handle the disc only by the edges. To keep
the disc clean, do not touch the surface of
the disc.
Discs should be returned to their cases after
use to avoid serious
scratches
that could
cause the laser pickup to skip.
Do not expose discs to direct sunlight, high
humidity, or high temperatures
for extended
periods.
Prolonged
exposure
to high tem-
peratures
can warp the disc.
Do not apply
paper
or write anything
on
either side of the compact
disc. Sharp writ-
ing instruments,
or the inks used in some
felt-tip
pens, may damage
the surfaces
of
the disc.
c
Fingerprints
should be carefully wiped from
the surface
of the disc with a soft cloth.
Unlike conventional
records, compact discs
have no grooves to collect dust and micro-
scopic
debris, so gently wiping them with a
soft cloth
should
remove
most particles.
Wipe in a straight motion from the inside to
the outside
of the disc. Small dust particles
and light stains will have no effect on repro-
dudicm
quality.
Never use such chemicals
as record sprays,
anti-static
sprays,
benzene
or thinner
to
clean
compact
discs. Such chemicals
can
darrrage
the plastic sutface
of the disc.
The unit will not play a disc that has been inserted
upside
down, or discs which do not
conform to the Compact
Disc standard. Also, the unit may not play discs that are scratched,
soiled or carry fingerprints.
8 cm CDs can b~ '%yed
without an adaptor.
-12-

Advertisement

Table of Contents
loading

Table of Contents