Hold Function - Sanyo CDP-455 Instruction Manual

HOLD FUNCTION
The HOLD switch disables the buttons
from operating to prevent play from starting
or stopping due to accidental operation.
For normal use, leave the switch in the
Off position.
To prevent battery drain:
Set the HOLD switch to the On position
when carrying the unit in a bag. The unit
will not operate even if the buttons are
pressed accidentally. This will prevent
unnecessary battery drain.
To prevent play from being interrupted:
Set the HOLD switch to the On position
after starting play. This will prevent
interruptions if the Stop (n) button or other
buttons are pressed accidentally.
" When the HOLD switch is set to the
On position during play, "HoLd"
appears in the display for
approximately 1 second.
Set the HOLD switch to the On
position during play. In this setting,
if any function button except the
OPEN button is pressed, "HoLd"
appears in the display for
approximately 1 second.
The VOLUME control will operate
regardless of the position of the HOLD
switch.
-9-