Safety Tips - Sanyo CDP-455 Instruction Manual

SAFETY TIPS
CAUTIONS FOR SAFETY
The apparatus shall not be exposed to
dripping or splashing.
Do not take the unit apart.
The laser beam used in the unit could
harm your eyes.
Do not insert pins, etc., inside the unit.
This unit is equipped with a safety de-
vice which automatically turns the laser
beam off when the disc compartment is
opened. If a pin or other metal object
should get inside the unit, however, this
safety device may be deactivated.
Do not drop the unit or subject it to
strong shocks. Doing so could result in
damage.
Do not place the unit in the following
locations:
' Locations where the temperature is high.
The unit's cabinet may warp or the unit
may otherwise be damaged if it isplaced
in direct sunlight, near heaters (where
the temperature is 60°C or greater) or in
cars with the windows closed. (In the
summer, the temperature may get as
high as 100°C or more.)
Use the unit within a temperature range
of 5°c to 35°c.
" In humid or dusty locations.
[n locations exposed to heavy vibra-
tions.
c On unstable or tilted surfaces.
CONDENSATION
If cold water is poured into a glass, water
droplets form on the outside of the glass.
This is called condensation. Condensation
may occur on internal operating parts of
the lens.
Condensation occurs:
When the unit is brought from the cold
outdoors into a warm room, or if it is in
a cold room which is heated quickly.
" [n the summer, if the unit is moved
suddenly from an air-conditioned room
or car to a hot or humid location.
Should condensation occur:
The unit may not operate properly if con-
densation occurs.
Wait for 1 or 2 hours (to allow the internal
parts to adjust to the surrounding tempera-
ture) before using the unit.
-5-