Table of Contents
Advertisement
Fuse Replacement
When the cigarette
lighter adaptor does
not operate, check to see if the fuse has
blown. If the fuse has blown, try to deter-
mine the cause,
then replace" the fuse
according to te following procedure.
1.
Disconnect
the cigarette
lighter plug
i
from the cigarette lighter socket.
2.
Turn the end portion of the plug and
remove.
3.
Remove the blown fuse.
4.
Put in a new 3A fuse.
5.
Turn the end portion of the plug and
tighten.
Fuse
'L
Tighten
(1
3
P" Remove
Cigarette
lighter plug
'nd 'f 'he plug
NOTES:
.
Replace the fuse with one of the same
rat ing.
.
If the fuse blows again after replace-
ment
contact
the store where your
purchased the unit, or contact a Sanyo
Authcwized Service Station.
-26-
Hide quick links:
Advertisement
Table of Contents
