Step 3: Verifying Proper Activation And Commissioning; Viewing System Status - SolarEdge SE12.5K Installation Manual

Step 3: Verifying Proper Activation and
Commissioning
1. Select Information and verify that the correct firmware versions are installed on
each inverter.
2. Select Status and verify that inverter is operating and producing power (see also
Viewing System Status on page 49).
3. Verify that the number of paired optimizers is the same as the number of
physically installed power optimizers.
4. Verify that additional configurations were properly set by viewing the relevant
Status screens.
5. Verify that the green inverter LED is steadily lit.
Your SolarEdge power harvesting system is now operational.

Viewing System Status

During normal operation, the Status screen displays all the inverter settings and
operation status. Scroll up or down to display various status parameters as described
in the following sections.
The LED indication provides more information about system performance; Refer to
LEDs on page 23.
To access the Status screen:
From the Commissioning menu select Status. The main inverter Status screen is
displayed (see below).
A red or orange icon (for example:
cell, indicating an error. The color indicates error severity (red is top severity). The
error description or information appears on the screen. Tap the error line for more
information and troubleshooting instructions, and refer to Errors and Troubleshooting
on page 76.
A gray clock icon (
temporary status, such as a connection process. When the process is complete, the
icon disappears and a constant status message is displayed.
Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.2
Chapter 5: Activating, Commissioning and Configuring the System Using the
) may appear at the top left corner of a status
) may appear at the top left corner of a status cell, indicating a
Inverter SetApp 49