Three Phase Inverter With Synergy Technology - SolarEdge SE12.5K Installation Manual

Each power optimizer also transmits module performance data over the DC power
line to the inverter.
Two types of power optimizers are available:
Module Add-on power optimizer – connected to one or more modules
Smart modules - the power optimizer is embedded into a module

Three Phase Inverter with Synergy Technology

The Three Phase Inverter with synergy technology inverter (referred to as 'inverter' in
this manual ) efficiently converts DC power from the modules into AC power that can
be fed into the main AC service of the site and from there to the grid. The inverter also
receives the monitoring data from each power optimizer and transmits it to the
SolarEdge monitoring platform (requires Internet or Cellular connection).
The inverter is comprised of one Primary Unit with an integrated Connection Unit with
a DC Safety Switch (referred to as 'Connection Unit ' in this manual) for disconnecting
the DC power of a SolarEdge system, and of one or two Secondary Units, depending
on the inverter's capacity. The Secondary Unit(s) are connected to the primary unit
with AC, DC and communication cables.
Each unit operates independently and continues to work in case the others are not
operating.
You can set up a master- slave configuration, connecting up to 31 additional
inverters to one master inverter.
Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.2
Chapter 1: Introducing the SolarEdge Power Harvesting System
Figure 2: Primary Unit with two Secondary Units
11