Water Leak Sensor Device Features; Lcd Screen - OneVue Sense E121 Installation Manual

Water Leak Sensor device features

A
B
Water Leak Sensor
A. LCD Screen
Provides a visual display of its last sampled reading and current operating state.
Last Sampled Reading
• Normal Reading: DRY
• Out of Range Reading (Alarm state): H2O (wet)
Current operating state indicators
Segment Description
Signal OK Indicates its last check-in to OneVue was successful.
No Signal Indicates the last check-in to OneVue failed.
For wireless network use, a failed check-in may be due to the device is not within range of its configured wireless access point or the
wireless signal strength is not adequate for normal operation. For PoE or Ethernet use, a failed check-in may be due to the device
could not establish a network connection.
If the device is powered by AC or Power over Ethernet (PoE), the yellow LED indicator flashes during this state.
Low Battery Indicates an Alarm state due to its estimated battery life is less than 25%.
icon
C
E
D
Page 9