Table of Contents
Advertisement
Enclosure
Enclosure: ABS plastic
Dimension: 4.7" H x 3.7" W x 1.3" D (11.93cm x 9.39cm x 3.30cm)
Weight: 0.3 lb (136 gram) with 2 AA Lithium batteries
Display: Liquid crystal display (LCD), HTN reflective glass, dimension: 0.75" H x 1.38" W (1.90 cm x 3.50 cm)
LCD Display: current sampled reading and operating status
LED Status Indicator
Water Detector input: USB Mini B (5 pin) connector
AC-power input: USB Mini B (5 pin) connector
Mounting: wall or surface-mount
Environment
Operating Temperature: 32° to 122° F (0° to 50° C), indoor use only
Storage Temperature: -4° to 140° F (-20° to 60° C)
Certifications
FDA registered, 21 CFR Part 11 compliant
FCC, CE, and IC compliant
Warranty
1 Year
Water Detector specifications
Operation
Detects water bridge across the two metal contacts located on the bottom side of the Water Detector. A change to the voltage reading
measurement detects a dry or wet condition. When water reaches both metal contacts, activates a change to the voltage reading
measurement that is then received by Water Leak Sensor.
Perimeter being monitored can be expanded by daisy chaining up to a maximum of four Water Detectors.
Enclosure
ABS plastic
Silicon rubber cover on open connection port
Length: 3.875 in. (9.843 cm)
Width: 1.6 in. (1.06 cm)
Height: 0.75 in. (1.90 cm)
Cable
13 ft. (3.9 m) length; Water-resistant
USB Mini B (5 pin) connector interface
Environment
Operating Temperature: 32° to 122° F (0° to 50° C), indoor use only
Storage Temperature: -4° to 140° F (-20° to 60° C)
Warranty
1 Year
Water Detector routine care
• Wipe the outer surface of the product with a soft cloth. Do not use any abrasive powder or a liquid cleaning
detergent.
• Periodically check the metal contacts and wipe away any water or foreign material that has become adhered to the
contacts.
Page 7
Advertisement
Table of Contents
