LED
State/Status
Yellow LED flashing
Warning state
• Low battery
• Unresponsive
Red LED flashing
Reading Alarm
• Out of Range, Past Alarm Delay
D. Water Detector
• Connects to Water Leak Sensor (E)
• Detector contacts
Detects water bridge across the two metal contacts located on the bottom side of the Water Detector. A change to
the voltage reading measurement detects a dry or wet condition. When water reaches both metal contacts, activates
a change to the voltage reading measurement that is then received by Water Leak Sensor.
• Integrated hanger for high-level water monitoring
• Detector input; daisy chaining up to four water detectors to one Water Leak Sensor
E. Sensor inputs
• AC power; Mini B port
• Water Detector; Mini B port
• PoE/Ethernet port (PoE model only)
• Contact Closure removable terminal block (enabled with Water Leak & Contact Closure Sensor model only)
Device power
AC or PoE power: LED illuminated and flashes
Refer to the LCD display to identify the condition
All power methods: LED illuminated and flashing
Page 11