Jandy AquaPure Ei Series Manual

FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed
and qualified in pool equipment by the jurisdiction in which the product will be installed where
such state or local requirements exists. In the event no such state or local requirement exists,
the installer or maintainer must be a professional with sufficient experience in pool equipment
installation and maintenance so that all of the instructions in this manual can be followed
exactly. Before installing this product, read and follow all warning notices and instructions that
accompany this product. Failure to follow warning notices and instructions may result in property
damage, personal injury, or death. Improper installation and/or operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which can cause
serious injury, property damage, or death.
These instructions are to be used with the following Jandy Replacement Parts:
R0512100 -- R-Kit, Power PCB Assembly
R0512300 -- R-Kit, Control PCB Assembly
R0512400 -- R-Kit, Controller Cover Assembly
R0512500 -- R-Kit, Output Cable Assembly
1. Introduction
This document gives instructions for replacing
various components on the Jandy AquaPure Ei chlorine
generating device.
The instructions were written with safety as the
priority and must be followed exactly. Not following the
written procedure or taking shortcuts may increase the
risk of personal injury. Read through the instructions
completely before starting the procedure.
Before starting the procedure, use the parts list at
the back of these instructions to identify the parts that
are in your kit. If any parts are missing from the kit
please call your local Jandy distributor for assistance.
For technical assistance, please contact our Technical
Support Department at 1.800.822.7933.
AquaPure
Replacement Kits
for Models APURE35/35C
WARNING
2. Ordering Information
To order or purchase parts for the Jandy AquaPure
Ei chlorine generating device, contact your nearest
Jandy dealer or distributor. If they cannot supply you
with what you need, call Zodiac Pool Systems, Inc. at
1.800.822.7933. In Canada call Zodiac Pool Systems
Canada, Inc. Customer Support Department at
1.888.647.4004.
Ei Series
®
TM