Use And Adjustment; Control Panel: Description - Riello Condexa Pro2 EVO Series Installation Instructions Manual

8 USE AND ADJUSTMENT

8.1 Control panel: description

The digital Master control panel of the Condexa Pro2 EVO is locat-
ed in the external cabinet. It is possible to operate on the master
contro.l panel opening the cover with the plexiglass window.
The various buttons on it allow you to perform a variety of func-
tions ranging from simple monitoring of the main parameters to
the system configuretion of the device depending on the type of
plant which is located downstream of it.
The control panel was designed to enable the user to enter the
various user modes; each one of these has a set of correspond-
ing functions, activated by pressing a button or combination of
two buttons pressed together. Furthermore, each button has a
specific function depending on the selected user mode.
BUTTON KEY
S1 Reset button
S2 Set/esc button
S3 System selection button
S4 Increase button
S5 Reduce button
S6 Confirmation button
U2 Illuminated display
U3 Illuminated display
D4 Green led
D5 Red led
Serves to release the electric board after a permanent arrest
Press to enter parameter mode and monitor mode for individual units
Press to visualize functional status of the various master systems
Press to increase a specific value
Press to reduce a specific value
Press to memorize new values
Displays information on boiler status
Displays information on boiler status
If on, it indicates the system is live
If on, it indicates a possible fault
17
DESCRIPTION
USE AND ADJUSTMENT
Figure 20