Philips HF3320/01 User Manual page 15

Note: The LED panel only goes on after the timer indicator stops flashing. This
prevents the light from shining into your eyes while you are setting the timer.
When the set time has elapsed, the timer automatically switches off
,
the appliance.
3 If you want to switch off the appliance before the set time has
elapsed, press the on/off button for 2 seconds.
Note: You can also switch off the appliance by pressing the on/off button
briefly a few times.
4 Remove the adapter from the wall socket.
setting the timer
1 Press the on/off button to switch on the appliance.
2 Press the on/off button one or more times to select the preferred
time (15, 30, 45 or 60 minutes ) (Fig. 12).
The corresponding segment or segments of the timer
,
indicator flash for 3 seconds.
Note: If you want to set the timer to 0 minutes, press the on/off button until
all segments of the timer indicator are out
When the timer indicator stops flashing, the LED panel goes on and
,
the timer starts counting down the set time.
If you have set more than 15 minutes, one of the segments goes
,
out every time another 15 minutes have passed.
setting the light intensity
1 Press the on/off button to switch on the appliance.
2 Press the light intensity button repeatedly to select the preferred
light intensity (low, medium or high) (Fig. 13).
cleaning
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
EnglisH
15