Table of Contents
Advertisement
MAINTENANCE OF SPINDLE SANDER
1.
To keep spindle sander in perfect condition, clean machine and attachments at all times.
2. Clean tapered sleeves and tapered socket before use, this will protect spindle sleeves
from nicks.
3. Bent sleeves are easily straightened by placing them in the tapered socket and slipping a
small pipe over the steel shaft. Using a dial indicator check that it is in correct position.
4. Check gearbox for proper oil level (Approx. 1/4 up on sight glass).
5. We recommend that a small amount of grease be applied to table tilting screw once a month.
6. No lubrication is required for the bearings, they are permanently lubricated.
13
Advertisement
Table of Contents
