Table of Contents
Advertisement
Noise emission
Notes concerning noise emission:
Given that there exists a relationship between noise level and exposure times, it
is not precise enough to determine the need for supplementary precautions. The
factors affecting the true level of exposure to operators are clearly the amount of
time exposed; the characteristics of the working environment, such as other
sources of dust and noise, etc. For example, adjacent machines may impact the
level of ambient noise. It is also possible that exposure level limits will vary from
country to country.
Specification sheet
Motor
Belt Size
Oscillation
Oscillation Adjustment
Belt speed
Drum Diameter
Main Table
Main Table Height
End Table
End Table Height
Dust port
Cabinet with Drawer
Miter Guage
Footprint
Net Weight
Ship Weight
Receiving your oscillating edge sander
Note: It is probable that your machine will be delivered by a third party. Before
you unpack your new machine you will first need to inspect the packing, invoice
and shipping documents supplied by the driver.Ensure that there is no visible
damage to the packing or the machine. You must do this prior to the driver
leaving. All damage must be noted on the delivery documents and signed by you
and the delivery driver. You must then contact the seller [Laguna Tools, Inc.] as
soon as is practical. If damage is found after delivery, contact the seller as soon
as is practical.
Note: It is probable that you will find sawdust within your machine. This is
because the machine has been tested prior to shipment from the factory and or
Laguna Tools, Inc.
MSANOES6X89-2-0320
2hp [220v 1 ph]
6" x 89"
1/2"
E-Z Knob
SFPM: 3900
4-1/4"
30" x 10"
Min/Max 37"- 42"
Cast Iron 12" X 12"
Min/Max 37"- 40"
4"
Yes
Yes
48" x 20"
258 lbs
306 lbs
6
Advertisement
Table of Contents
