Repairs; Manufacturer's Declaration - Linak DESKLINE DESK FRAME 2 User Manual

Repairs

In order to avoid the risk of malfunction, all DESKLINE
repairers, as special tools must be used and special gaskets must be fitted. Lifting units under warranty must also be returned
to authorised LINAK workshops.
Warning!
If any of the DESKLINE
Warning!
The DESKLINE
®

Manufacturer's declaration

Herewith declares that LINAK DESKLINE
Control Boxes
Linear Actuators
Lifting Columns
Desk Panels
RF Controls
Accessories
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:
1.5.1 Electricity supply
The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into which
it is to be incorporated has been declared in conformity with the provisions of the Machinery
Directive 2006/42/EC where appropriate.
Nordborg,
RoHS mark must be obtained by the manufacturer of the end-use products. LINAK A/S can supply
If required, the
the required material information on our products.
Original Declaration
For more information, visit: https://www.linak.com/about/declarations/
or contact: chemicalcompliance@linak.com
products are opened, there will be a risk of subsequent malfunction.
®
systems do not withstand cutting oil.
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
®
CBD6S
DB5, DB6, DB14, LA23, LA31
DL1A, DL2, DL4S, DL5, DL5IC, DL6, DL6IC, DL7, DL8, DL8IC, DL9, DL9IC,
DL10, DL10IC, DL11, DL11IC, DL12, DL14, DL15, DL16, DL16IC, DL17,
DL19, DL19IC, BASE1
DPA, DPB, DPH, DPF, DPG, DPT, DP, DP1CS
HB10RF, HB20RF, RFRL
BA001, BLE2LIN, DS1, DF2, Kick & Click, SLS, SMPS001, SMPS002, SMPS006
2019-05-27
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
repairs must only be carried out by authorised LINAK workshops or
®
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
products as characterized by the following models and types:
Page 7 of 24