During Operation; Repairs; Manufacturer's Declaration - Linak DL5 User Manual

(continued)
• System connection. The individual parts must be connected before the con-
trol box is connected to the mains. See the User Manual for LINAK actuators,
if necessary.

During operation

• If the control box makes unusual noises or smells, switch off the mains volt-
age immediately.
• Take care that the cables are not damaged.
• Unplug the mains cable on mobile equipment before it is moved.
• The products must only be used in an environment, that corresponds to their
IP protection.

Repairs

In order to avoid the risk of malfunction, all DESKLINE
carried out by authorised LINAK workshops or repairers, as special tools must
be used and special gaskets must be fi tted. Lifting units under warranty must
also be returned to authorised LINAK workshops.
Warning!
If any of the DESKLINE
subsequent malfunction.
Warning!
The DESKLINE
6
® products are opened, there will be a risk of
® systems do not withstand cutting oil.
® repairs must only be