Download Print this page

SystemAir VR-250 EH/B /3 User And Maintenance Instructions page 5

Advertisement

DARBĪBAS PRINCIPS (Att. 3)
Iekārta tiek aprīkota ar vadības
paneli ar sekojošām funkcijām:
Gaisa plūsma (ventilatora ātrums)
Gaisa plūsmas izvēle ir 3 pakāpēs. Ventilatora
ātrumu izvēlas spiežot pogas (4) un (5). Indikācijas
lampas (1), (2) un (3) rāda uzstādīto ventilatora
ātrumu.
Min.
(1)
Minimāla ventilācija.
brīvdienās, svētku dienās un laikā, kad telpās
neatrodas cilvēki.
Norm. (2)
Normāla ventilācija. Gaisa plūsmu
šim
režīmam
var
iestādot uz vadības paneļa (skatīt montāžas
instrukciju, Palaišana ekspluatācijā).
Max.
(3) Pastiprināta ventilācija. Lieto, kad ir
nepieciešama papildus ventilācija telpās.
Pieplūdes gaisa temperatūra
Pieplūdes gaisa temperatūru var izvēlēties 5
pakāpēs.
Pieplūdes
samazināšanu / palielināšanu iestāda spiežot
pogas (9) un (10). Indikācijas lampas (6), (7) un (8)
rāda iestādīto temperatūru.
Pakāpe 1
Deg indikācijas lampa (6) (rūpnīcas
iestād.)
Pakāpe 2
Deg indikācijas lampas (6) un (7)
Pakāpe 3
Deg indikācijas lampa (7)
Pakāpe 4
Deg indikācijas lampas (7) un (8)
Pakāpe 5
Deg indikācijas lampa (8)
LV
izvēlēties
(augsts/zems),
gaisa
temperatūras
OPERATION (Fig. 3)
The unit is controlled from a separate
controller, with the following functions:
Airflow (Fan speed)
Switches for choise of airflow in 3 steps.
Increase/ decrease fan speed by pressing the
switches (4) and (5) alternatively. Lamp signals
(1), (2) and (3) show set airflow.
Min (1)Minimum ventilation. To be used during
Lieto
holidays or when the building is not in
use.
Norm (2)Normal
building. Airflow for normal ventilation
can be chosen (high/low) by means of
setting
installation instructions-Commissioning).
Max (3)Forced ventilation. Is used when extra
airflow is required.
Supply air temperature
Switches for choise of inlet air temperature in 5
steps. Supply air temperature is increased/ de-
creased by pressing switch (9) and (10)
alternatively. Lamp signals (6), (7) and (8) show
set supply air temperature.
Step 1 Lamp (6) lights (factory setting)
Step 2 Lamp (6) and (7) light
Step 3 Lamp (7) lights
Step 4 Lamp (7) and (8) light
Step 5 Lamp (8) lights
5
ventilation
adapted
on the control panel (see
to
the

Advertisement

loading