Precautions; What's In The Box - FLASHFORGE 3D PRINTER Creator Startup Manual

Precautions

[Important: Read this user guide and heed all warnings]
! Because the Creator is sensitive to static electricity, make sure to release your own
body's static electricity by touching a grounded object before any operation of the
Creator. If you want to repair your Creator by yourself, the power source must be
shut off and the power cord must be unplugged.
! Beware of high temperatures. After operating, do not move the unit until it has
cooled to the touch. Before attempting to repair, the heating plate should be cool to
the touch. The extrusion material is very hot as it comes out of the extruder—allows
cooling before handling.
! Operate the Creator in a ventilated area. The machine may release a strong odor.
! Do not wear gloves when operating or repairing—entanglement may occur and
cause injury.
! Do not leave the machine unattended when it is in operation.

What's in the box

Along with your Creator 3D printer, this package contains the following...
The accessory box on the top of the machine includes:
--One or two extruder
--1x or 2x filament holders
--bolt tool plate
--hex wrench tool box
Under the build platform in the Creator framework, there are:
--1kg primary color ABS filament
--1kg black ABS filament (only for dual extruders)
Under the Creator you'll find:
--power supply
--USB A to B cable
--1x or 2x filament guide tubes
第 三 页 共 三 页