Special Procedures In Case Of Failures - Bertos E7PI Instruction Manual

3.5. SPECIAL PROCEDURES IN CASE OF FAILURES

 If the appliance should not work properly during use, turn it off immediately and close
or cut off all supplies (electrical power supply and water).
 Apply to a service centre for help.
The manufacturer shall not be held responsible nor has any warranty
commitments for damage caused by non-compliance with prescriptions
or by installation not in conformity with instructions.
The same applies in case of improper use or different application by the
operator.
Warning! : Problems and failures may occur even when the appliance is used
properly. Here is a list of the mist probably situations and controls that
the operator should perform to avoid applying to a service centre
unnecessarily.
If the problem is not solved after the necessary controls, turn off the
appliance immediately, unplug it, cut off any supplies and apply to a service
centre.
... the vat contents do not
heat up:
Manuale d'istruzione per l'installazione, la manutenzione e l'uso
Pentole elettriche E7PI
3.6. HOW TO PROCEED, IF ...
 check that the power ON/OFF switch installed before
the appliance is on;
 otherwise turn off the appliance and apply to a service
centre, as the safety thermostat may have been
activated due to an excess of temperature in the
cooking vat. This occurs especially when the appliance
is turned on and the vat and/or the jacket is/are empty.
07.04.01 - IT pagina 50