Cleaning And Care Of The Appliance; Daily Cleaning - Bertos E7PI Instruction Manual

3.3. CLEANING AND CARE OF THE APPLIANCE

 Do not use aggressive substances or abrasive detergents when cleaning the stainless
steel components.
 Avoid using metal pads of the steel parts as they may cause rust. For the same
reason, avoid contact with materials containing iron.
 Do not use sandpaper or abrasive paper for cleaning; in special cases use a powder
pumice stone.
 In case of particularly resistant dirt, it is advisable to use abrasive sponges (e.g.
Scotch-Brite).
 It is advisable to clean the appliance only once it has cooled down.
Warning! : When cleaning the appliance never use direct jets of water to prevent
infiltration of the liquid and damage to components.
 Clean the cooking vat with water and a detergent, rinse thoroughly and dry well with a
soft cloth.
 External surfaces should be washed down using a sponge, and hot water with a
suitable proprietary cleaner addend.
 Rinse always thoroughly and dry with a soft cloth.
3.4. SPECIAL PROCEDURES IN CASE OF PROLONGED
 If the appliance is to stand idle for any length of time (e.g. holidays or seasonal
closing), it must be cleaned thoroughly, leaving not traces of food or dirt.
 Leave the lid open so that air can circulate inside the vat.
 For added care after cleaning, the external surfaces can be protected by applying a
proprietary metal polish.
 Be absolutely sure to shut off all utilities (electrical power supply and water).
 Air the room appropriately.
Manuale d'istruzione per l'installazione, la manutenzione e l'uso
Pentole elettriche E7PI

3.3.1. DAILY CLEANING

INACTIVITY
07.04.01 - IT pagina 49