Required Tools; Calibration Tools; Digital Panoramic - Planmeca Proline XC Panoramic Calibration Manual

2

REQUIRED TOOLS

Calibration Tools

2.1.
2.1.a. Digital Panoramic
Ball phantom (part number 50971) used for checking the position of the
Patient Positioning Mechanism and the Positioning lights. (Figure 1)
Frankfort plane alignment tool (part number 50977) used with the ball
phantom for checking the position of the Frankfort plane light. (Figure 2)
Beam alignment tool, fluorescent screen, (part number 50972) used for
checking the position of the x-ray beam. (Figure 3)
Figure 1
Figure 2
Figure 3
- 7 -