Table of Contents
Advertisement
Description and specifications
October 2019
Figure 1-6: Abrasive Shield Assembly
Dimensions are millimeters with inches in parentheses.
A. View A.
B. View B.
C. Before welding, butt item 02 with item 01 as shown.
D. Weld on both sides with expanding chill block.
E. On inside Ø break for smooth rounded edge on both ends of chamber.
F. Skin cut face for 90°.
G. Ø 0.75 in. (19 mm) through four places equally spaced on Ø 4.75 in. (120.65 mm) B.C.
Note
In highly abrasive applications, rotate the shield 90 degrees at normal service intervals to
present a new wear surface to the abrasive flow stream.
20
Reference Manual
00809-0100-4880
Emerson.com/Rosemount
Advertisement
Table of Contents
