Motorola 82543 Owner's Manual page 5

This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Embedded Communications Computing products with the CE marking comply with the
EMC Directive (89/336/EEC). Compliance with this directive implies conformity to the
following European Norms:
EN55022 "Limits and Methods of Measurement of Radio Interference Characteristics
of Information Technology Equipment"; this product tested to Equipment Class A
EN55024 "Information technology equipment—Immunity characteristics—Limits and
methods of measurement"
Board products are tested in a representative system to show compliance with the above
mentioned requirements. A proper installation in a CE-marked system will maintain the
required EMC performance.
In accordance with European Community directives, a "Declaration of Conformity" has
been made and is available on request. Please contact your sales representative.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules.
Safety Notice for Information Technology Equipment
This equipment is to be used only with products that are certified by an internationally
recognized safety organization (for instance, UL or CSA).
All Motorola PWBs (printed wiring boards) are manufactured with a flammability rating
of 94V-0 by UL-recognized manufacturers.
This equipment generates, uses and can radiate electromagnetic energy. It
!
may cause or be susceptible to electromagnetic interference (EMI) if not
installed and used with adequate EMI protection.
Caution
CE Notice (European Community)
FCC Notice
Flammability
EMI Caution