IBM 10/100 EtherJet CardBus Adapter with 56K Modem Installation And User Manual page 42

fcr0mst.book Page 6 Monday, July 13, 1998 9:36 AM
LINESPEED (For 32-bit NDIS3 Driver IBMC.SYS) forces opera-
tion to 10 or 100 Mbps. Valid parameters are AutoDetect, 10
Mbps, and 100 Mbps. Default is AutoDetect.
LINKDISABLE disables link integrity for non-IEEE 10BASE-T
networks such as StarLAN 10. Without this keyword in the driver
command line, the driver defaults to link integrity ENABLED.
MEM, MEMORY specifies the host PC memory location for the
EtherJet CardBus Adapter with 56K Modem in hexadecimal nota-
tion, when MODE MEMORY (memory-mapped I/O) is being used
(see MODE). The memory block occupies 4K bytes of host mem-
ory.
MODE when set to IO disables requests for memory-mapped
mode on systems that only support an I/O-driven card. The MEM-
ORY setting provides increased performance on computers that
allow simultaneous availability of memory and I/O resources.
NETWORKADDRESS allows user to override adapter's unique
network node address by specifying a different node address.
NOBURST disables burst mode reads on the EtherJet CardBus
Adapter with 56K Modem. Using this keyword will force the
adapter to initiate a bus-master request for each read, negatively
impacting performance
NOCHECK disables verification of adapter resources. If the
driver detection and verification code is causing problems when
loading, this keyword can be used to turn the feature off.
NODEADDRESS see NETWORKADDRESS.
NOEARLYRX disables Advanced Look-ahead Pipelining features
of the adapter. This keyword may be used to troubleshoot sys-
tems that have inexplicable network problems. Using this key-
word may negatively impact performance.
NOEARLYTX disables early transmit capability of the Adapter.
This keyword may be used to troubleshoot systems with inexpli-
cable network problems. Keyword could negatively impact perfor-
mance.
NOLED turns off LED indicators to conserve power.
NOPREFETCH disables prefetching in memory-mapped I/O
mode by turning off this capability on the CardBus bridge. Using
this keyword may negatively impact performance.
4-6 10/100 EtherJet CardBus Adapter with 56K Modem