Sfp+ Port Led; Management Ethernet Port Led - H3C S6890 Series Installation Manual

LED status
Flashing yellow (3 Hz)
Off

SFP+ port LED

Table 25 SFP+ port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off

Management Ethernet port LED

The copper and fiber management Ethernet ports each is provided with a LINK/ACT LED.
Table 26 Copper management Ethernet port LED description
LED mark
LINK/ACL
Table 27 Fiber management Ethernet port LED description
LED mark
LINK/ACT
Description
The port is sending or receiving data at 40 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No transceiver module or cable has been installed, or no link is present on the port.
Status Description
The port is operating at 10/100/1000 Mbps and a link is present on
Steady green
the port
Flashing green The port is receiving or sending data.
Off No link is present on the port.
Status
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Description
No link is present on the port.
The port is operating at 1000 Mbps.
The port is receiving or sending data at 1000 Mbps.
The port is operating at 100 Mbps.
The port is receiving or sending data at 100 Mbps.
44