S6890-30Hf - H3C S6890 Series Installation Manual

The switch comes with a dust plug in the fiber management Ethernet port. Before you use the port,
remove the dust plug from it. In
Figure 38 Left panel
(1) Primary grounding point

S6890-30HF

Figure 39 Front panel
(1) SFP+ port
(3) QSFP28 port
Figure 40 Rear panel
(1) Fiber management Ethernet port
(3) Copper management Ethernet port
(5) USB port
(7) Fan tray 2
(9) Fan tray 4
(11) Power module 2
(13) Copper management Ethernet port LED (LINK/ACT)
(14) Fiber management Ethernet port LED (LINK/ACT)
Figure 37, the dust plug has been removed from the port.
(2) Auxiliary grounding point
(2) SFP+ port LED
(4) QSFP28 port LED
(2) Console port
(4) Mini USB console port
(6) Fan tray 1
(8) Fan tray 3
(10) Power module 1
(12) System status LED (SYS)
33