Robin SmartView Manual page 42

System / Events
The Robin SV is equipped with various options for initiating actions. For example, starting an audio/
video recording, an outgoing telephone call to a predefined number, a sound signal etc.
These actions are started by an Event.
An 'Event' may be movement in the image, a loud noise that exceeds a predefined volume or when
a signal from one of the doors is sent to the Robin SV.
You can define the various 'Events' here and set the response actions that take place when an
'Event' occurs.
Events
Define the events. Choose from:
 Call - an incoming or outgoing call
 Motion - movement detection
 HTTP - enable control with http commands
The green '+' creates a new 'Event' .
The '>>' behind a line opens the details for this 'Event'.
The red X behind a line deletes the 'Event' from the list.
 Name
 Enable
 Active
 Type
 Min duration
 Direction
gf41
The name that is associated with this 'Event'.
Activates Motion detection.
Indicates whether an 'Event' is active.
Selects the type of 'Event'.
Indicates how long the 'Event' remains active.
Used if the type is 'Call'. Selects incoming or
outgoing call
Manual Robin SV ENG - v. 1.6
41